How to correctly select and replace fully synthetic air compressor oil?
Publish Time: 2025-01-28
Air compressors are indispensable equipment in industrial production, and selecting and replacing suitable fully synthetic air compressor oil is the key to ensuring its efficient and stable operation. The following will introduce in detail how to correctly select and replace fully synthetic air compressor oil.When choosing fully synthetic air compressor oil, the first thing to consider is the type of air compressor. Different types of compressors (such as screw, piston, centrifugal, etc.) have different requirements for engine oil. Therefore, the engine oil that matches the specific model of the compressor and the manufacturer's recommendations should be selected.Working conditions are also an important factor to consider when choosing engine oil. For example, compressors working in high temperature, high pressure or humid environments need to choose engine oil with high temperature stability, anti-emulsification and anti-corrosion. Fully synthetic engine oil usually has better performance and can meet these harsh working conditions.Lubrication performance is one of the key indicators of engine oil. Fully synthetic engine oil usually has excellent lubrication performance, can reduce friction and wear, and protect mechanical parts. When choosing, you should pay attention to the viscosity grade and lubrication performance grade of the engine oil to ensure that they meet the requirements of the compressor.When replacing fully synthetic air compressor oil, you need to follow certain steps. First, make sure the compressor is stopped and wait for it to cool to a safe temperature. Then, find the drain bolt, loosen it and drain the old oil. During the draining process, be careful to prevent the oil from splashing and polluting the environment.Next, replace the oil filter. Remove the old filter, apply a small amount of new oil to the seal of the new filter, and then tighten it in the correct direction and torque. This step is the key to ensure that the new oil is clean and free of impurities.When filling the new oil, a special refueling tool should be used, and the oil volume and model specified by the manufacturer should be filled. After filling, start the compressor and let it run for a few minutes, then turn off the compressor and check the oil level. The oil level should be between the upper and lower scales of the oil dipstick to ensure that the compressor is fully lubricated.Finally, after changing the oil, pay close attention to the operating status of the compressor and check for oil leaks. At the same time, it is recommended to appropriately reduce the high-load operation of the compressor for a period of time after the replacement to allow the new oil to fully run in and play a role.In conclusion, the correct selection and replacement of fully synthetic air compressor oil is essential to ensure the stable operation of the compressor. By following the above steps and suggestions, the service life of the compressor can be extended and production efficiency can be improved.
